Innovations

Fly ash is a waste by-product generated by coal-fired electricity power stations. Due to its environmental impact, there is a growing need for safe and sustainable methods of fly ash disposal. One effective approach is the beneficiation of fly ash through the production of zeolites—a class of

The cost of building materials contributes significantly to overall construction costs, with ordinary Portland cement (OPC) being one of the main components. The production of OPC is not environmentally friendly. It is energy-intensive, uses natural resources such as limestone, and produces high

The North-West University (NWU) has pioneered the novel use of Europium-Tellurium-Oxide (ETO) in the production of clean energy. ETO is a light-chargeable catalyst material that exhibits sustained and enhanced activity after light excitation has ended. Its unique characteristics present an

The invention relates to a novel process of partial oxidation of un-agglomerated chromite ore in ferrochrome production processes. The process includes the steps: Providing a source of un-agglomerated chromite ore; subjecting the source of un-agglomerated chromite ore to pre-oxidation at a

As a startup construction company in Limpopo, you may face the following challenges during the registration process: 1. Bureaucratic red tape: Complex regulatory requirements and lengthy processing times. 2. Compliance with industry regulations: Meeting construction industry standards, licenses, and

In the coarse particle transportation industry, there are major challenges in pumping mineral suspensions due to water scarcity. As a result, more solids are transported and pipe blockages occur which cause major problems such as environmental spillages and economic losses (pipe replacement, wastage

Floatation Device is a system that acts as an anchor and elevator for equipment, shacks and mobile houses that would otherwise be affected by flooding. During the rainy season, the Floatation Device elevates the items away above the stormwater and provides stability to secure items from damage or

The invention relates to the use of maghemite nanoparticles at pH less than 5 to remove sulphate, manganese, copper, nickel, cobalt and zinc metal ions from acid mine drainage (AMD). In conventional AMD treatment, these pollutants are only removed at higher pH, and that requires costly alkaline

Industrial electrowinning is one such example where archaic technology has become the norm, with innovation being limited simply because the process is “good enough”. After doing a fundamental analysis on the electrowinning process, the design team has invented a dynamic solution which improves on

Air quality is a concern worldwide. Consequently, efficient means to monitor air pollutants are critical. Current commercially available carbon-based sorbents used for sampling volatile organic compounds (VOCs) in air typically require solvent extraction prior to analysis, and they cannot be reused

Improved Alkaline-Activated Slag Composition: Green Mortar Solution The invention relates to the development of both an improved alkaline-activated slag (AAS) composition as well as a dry mixed ready-to-use alkaline-activated slag (AAS) composition. The ready-to-use AAS can be pre-packed into bags

The invention The invention uses plastic waste and Waste Foundry Sand (WFS) to produce building and construction material with a density of between 1700 and 1750 kg/m 3 . The plastic is melted and WFS is used to produce a paste for the moulding of building material. Problem solved Plastics are vital